Erik Buell & Buell Motorcycle History:

Buell Motorcycles is an American motorcycle manufacturer based in Grand Rapids, Michigan, United States. It was founded in 1983 by ex-Harley-Davidson engineer Erik Buell. Harley-Davidson acquired 49 percent of Buell in 1993, and Buell became a wholly owned subsidiary of Harley-Davidson by 2003.

On November 17, 2006, Buell announced that it had produced and shipped its 100,000th motorcycle. On October 15, 2009, Harley-Davidson announced the discontinuation of the Buell product line as part of its strategy to focus on the Harley-Davidson brand. The last Buell motorcycle produced through Harley-Davidson was in October 30, 2009, bringing the number manufactured to 136,923.

In November 2009, Erik Buell announced the launch of Erik Buell Racing, an independent company run by Erik Buell which initially produced race-only versions of the 1125R model, then subsequently offered an updated 1190RS model for the street or the track, and produced further improved 1190RX and 1190SX models which are intended for street or track use.

Buell Exhaust Systems:

Complete full systems. ForceWinder still manufactures exhausts for your: Buell Blast / Buell XB Lightning, XB Firebolt / Buell Exhausts from 1995 – 1998 – Buell S1, S2, S3, Buell M2 / Buell Exhausts from 1999 – 2002 – Buell M2, Buell X1, Buell S3

Buell Air Cleaners:

Erik Buell made fantastic motorcycles, they needed a fantastic air cleaner – enter ForceWinder. Since 1989 we have been making air intakes for the Buell Motorcycle line up.

Lets face it…when it comes to Buell.. and performance… Its truly BEST TO USE FORCE and the very awesome XB’s are no exception. The Buell XB is probably one of the most incredible mass produced sport bikes ever… With light years ahead innovations.. with the soul of a Harley.

BUELL EXHAUST FOR 1995-1998 Buell S2, S3 Thunderbolt / 1996-1998 Buell S1 Lightning / 1997-1998 Buell M2 Cyclone

The return of the StreetFighter Race exhausts for the 94-99 Buells. With an updated awesome TWO PIECE design for stress relief and maximum longevity. This is the one with ALL the TRICKS and now LONG LIFE.

Now available for ForceWinder Buell XB Exhausts. This baffle has been tested and reduces DB while not reducing performance. Easy to bolt onto megaphone comes with three pre tapped holes and bolts. You will need to mark up your exhaust and drill out.

Buell XR II FI by ForceWinder is locked, loaded, and built to go full savage. Now with a precision temp sensor port filter placement and an all-new breather setup — engineered to eliminate any blow out debris from cycling back into your filter and intake system. No grime, no compromise. Just clean airflow and raw throttle response like it was always meant to be. The Buell XR II FI.

ForceWinder “BLACK OPS” for Buell Motorcycles. A true performance air cleaner by ForceWinder. Fits Buell Motorcycles with “CV Carb”. Will not fit XB or Mikuni or S&S carb bikes.

Includes mounting hardware, 1/2″ breather bolts and offers an internal breather system that is clean and easy on the eye. Also comes in a Gloss Black Variant.

ForceWinder Streetfighter Race Complete Exhaust For Buell Blasts. No baffle, true open exhaust system. This is what we call the “RAW” finish! Install as is or you finish and SAVE..! Mild Steel. **Note – It is loud! The Blast pipe will also have a welded support bracket on the Megaphone.

Buell Exhaust for 1999-2002 Buell X1 Lightning / 1999-2002 Buell M2 Cyclone / 1999-2002 Buell S3 Thunderbolt.  “X1 and S3 Will Need O2 Sensor” – We will weld on the o2 bung but please add that it is needed into “THE NOTES” at time of order.

Updated TWO PIECE design for stress relief and maximum longevity. This is the one with ALL the TRICKS and now LONG LIFE.

ForceWinder’s XRII Buell FI Air Intake, made specifically for Fuel Injected Buell X1 & S3 (1999-2002). The XRII ForceWinder… Hitech looks & Hi Performance… precision all aluminum lightweight. ForceWinder sets the pace. The XRII comes with the trick Probike external breather system.

The ForceWinder Dominator Series is just that – Dominating – Poured aluminum casting is just perfectly coated with Gloss Black or a Show Polished Finish. Intricate design with flow offers a clean install with performance added features.  Added bling and this is why we call it the Dominator Series. Stock support bracket is NOT needed. Can be used wit S&S, CV, Mikuni Carbs.

ForceWinder “BLACK OPS” for Buell Motorcycles. A true performance air cleaner by ForceWinder. Fits Buell Motorcycles with “CV Carb”. Will not fit XB or Mikuni or S&S carb bikes.

Includes all mounting hardware, 1/2″ breather bolts and offers an internal breather system that is clean and easy on the eye. Also comes in a Chrome Variant.